XXK150360A-AIR
15hp 600V Direct Drive Industrial MERV-13 Cyclone Dust Collector w/ Air Lock
$18,990.00
Dust control solution for commercial shops collecting dust from multiple tools at once. Includes heavy-gauge, full welded steel cyclone separator with neutral vane inlet. Feature robust U.S. made motor with welded carbon steel impeller. Angle iron telescoping stand mounts the system in a compact footprint with dual 55 gallon dust bins. Configurable filtration options available. Waste is continuously fed into a customer supplied container of your choice via a Rotary Air Lock Valve.
| Horsepower | 15 hp |
|---|---|
| Motor Type | U.S. TEFC Motor |
| Motor Service Factor | 1.15 |
| Voltage | 600V |
| Recommended Breaker Size | Call for Info |
| Phase Option | Three-Phase (Pre-Wired) |
| Frequency | 60Hz |
| Power Connector Type | 4 Bare Wires |
| Impeller Type | Backward inclined, welded carbon steel. |
| Impeller Size | 18" Dia. |
| Real CFM Rating | 6,000 Actual CFM at 2.3" S.P. |
| Noise Level | 85-87 dBA @ 10 ft |
| Cyclonic Separation Efficiency | Removes over 99% of fine wood dusts |
| Filter Type | Izumi Axtar Spunbond Media |
| Filtration Efficiency | 99.9% @ 0.2-2.0 microns |
| Total Filtration Area | 620 sq ft |
| Waste Capacity | Customizable |
| Remote Control | Call for Info |
| Primary Build Materials | Cold Rolled Steel |
| Welding | Seam Welded |
| Static Resistance Rating | Conductive (Metal) |
| Color | White |
| Inlet Size | Round: 14" Dia. Square ID: 10"(W) x 16-1/2"(H) Square OD: 12-3/8"(W) x 18-3/8"(H) |
| Outlet Size | Round: 16" Dia. Square ID: 20-1/4"(W) x 11-1/2"(H) with 1-1/2" Flange |
| Discharge Size | 14" ID Flange |
| Height | 132.5" |
| Contents | Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Angle Iron Stand, 2x Dust Bins, Hardware |
| Manufacturer | Oneida Air Systems |
| Manufacturer Statement | Made in USA |
| Warranty Information | 2 Year Limited Warranty |
| Certifications | NFPA Compliance Ready (See Reference Guide). cETLus certified to both U.S. and Canadian product safety standards by an NRTL. Conforms to UL-1017 and Can/CSA-C22.2 No. 243 standards. |
| Proposition 65 | WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. |
We found other products you might like!
