FAQ Search Results

The 35 gallon steel drum is 22.25" tall. The 55 gallon steel drum is 35" tall.

All of our current remote control products operate via Radio Frequency (RF).

We do not measure that small of micron with cyclonic separation. It will filter 99% of all visible dust/chips from the airstream.

The height of this unit is approximately 64"

On the floor, the V-System's stand is a 30" x 30" square. How wide the overall system is depends on the orientation of your filter plenum. If the plenum is oriented ninety degrees clockwise from the system's inlet, then the overall width would be 47". Please refer to the owner's manual for more detailed dimensions.

Yes. You can find the individual components (drum, clamp, and lids) at oneida-air.com/dust-collectors/system-components/containers/components.

By California law, Oneida Air Systems is required to provide advance notice to customers of potentially hazardous materials included in our products. This requirement is enforced regardless of how much of that material is present in the actual product. The black, static dissipative resin used to create this cyclone separator contains carbon black, which is a chemical considered as "possibly carcinogenic to humans" (Group 2B) when the chemical is an airborne, particulate form. This form would not be typical of normal use of the cyclone, but the law requires this statement be provided regardless.

The V-3000 dust collector measures 88" tall. You can find more detailed dimensions by referencing the Owner's Manual, posted on the product page under the "Documents" tab.

It is 30.75" to the very top of the tapered elbow fitting on the Dust Deputy Deluxe (with a single bucket and no casters).If you are requesting this measurement to fit the product underneath a table, or into a custom built cart, we recommend leaving an additional 0.5" of space above the cyclone (31.25" total) to accommodate variations in hose connections.

Oneida Air Systems typically recommends that customers purchase the Dust Deputy product line and motorized dust collection systems 5HP or smaller through our distribution partners in Canada for the most cost effective and convenient experience. Information about our partners can be found at oneida-air.com/international. For systems over 5HP, contact Oneida Air Systems to arrange shipment to a forwarder in the US or direct to Canada using your broker and carrier.